Why buy an IQ, not a glossmeter?
A high quality finish is important in a huge number of industries.
“High gloss, deep finish, smooth and homogenous.”
Who needs these extra measurements?
Proven applications in:
The Rhopoint IQ has standard glossmeter optics @ 60° & 85° and a high definition 512 element LDA @ 20°+/- 7.25°.
Which angle is best for my application?
Surfaces with gloss < 10GU @ 60º should be measured with the
Haze is light that has been reflected by small surface structures adjacent to the main specular component.
No haze shows deep reflection whereas a surface with haze shows loss of reflective contrast.
On a curved surface low haze shows minimal halos , whereas a hazy surface shows multiple halos.
Causes of Haze
Haze is often visible as a milky finish on high gloss surfaces
Orange peel is a surface texture which resembles the skin of an orange
Causes of Orange Peel
Distinctness of Image- DOI
Distinctness of image is the aspect of gloss characterized by the sharpness of images of objects produced by reflection at a surface.
Haze α = Δ Reflectance / Δ Angle
Low DOI is caused by large surface structures distorting the reflected light. The surface is visible: orange peel.
The Rhopoint IQ measures all aspects of reflective appearance
Three high gloss coated panels measure identically using a standard glossmeter, but orange peel dramatically reduces the perceived quality of the surfaces with texture.
Gloss readings @ 20º approximately 85GU
Only by using additional parameters of DOI/RIQ can the visual quality be measured.
Goniophotometric curves clearly show the visual differences between the a smooth surface, a medium texture surfance and a high texture surface.
RIQ- Reflected Image Quality
RIQ is a more sensitive, updated version of DOI. A new high sensitivity/high resolution sensor allows improved measurement.
RIQ vs DOI
DOI is not sensitive to low amounts of orange peel on highest quality surfaces.
RIQ has more proportionate response to orange peel on a wider range of surface finishes.
RIQ works well in differentiating low gloss surfaces with different specular/diffuse components.
Rhopoint IQ– DOI
Quality differences between economy and premium are seen, poor orange peel on economy filler cap is shown, however horizontal and vertical surfaces are not differentiated.
The DOI values do not reflect differences between horizontally and vertically sprayed panels; premium and economy models are not differentiated.
RIQ measurement is sensitive enough to appearance differences due to-
Sample Flatness Compensation
20° gloss & haze meters have fixed geometry. They require very flat surfaces to measure accurately.
The Rhopoint IQ uses a 512 element sensor that measures 20 +/- 7.25°. It mathematically determines the gloss angle.
With a standard gloss meter non-flat surfaces cause light to reflect on an incorrect part of the sensor and give inaccurate gloss results. With the Rhopoint IQ light is reflected on different areas of the diode array, and the instrument automatically compensates for the surface irregularities.
On the left : Two similar appearance surfaces, one is curved- the reflected light falls away from the centre of the array.
The reading on the right showing the IQ automatically compensating for non-flatness.
Law of Reflection: The direction of incoming light and the direction of outgoing light reflected make the same angle with respect to the surface